home *** CD-ROM | disk | FTP | other *** search
/ Windows Expert / Windows Expert.iso / drivers / wyse700.zip / READ.ME < prev    next >
Text File  |  1991-01-29  |  3KB  |  62 lines

  1.     *****************************************************
  2.     **      WY-700 Windows 3.0 Driver Installation     **
  3.     *****************************************************
  4.  
  5.     In these instructions you are told to "select" various options.
  6.     This means you should click on the option if you are using a mouse
  7.     or if you are using the keyboard use the arrow keys to highlight
  8.     the option and then press ENTER.
  9.  
  10.  
  11. 1.  There are two jumpers on the WY-700 adapter card.
  12.     One is labeled "MONO" and the other is labeled "COLOR".  If the WY-700
  13.     is the only monitor you have on your system, make sure both jumpers 
  14.     are set to the ON position.  See page 2-3,4 of the WY-700 User's Guide.  
  15.  
  16. 2.  Use the "SCREEN MONO" WY-700 utility command to set the display to
  17.     monochrome.
  18.  
  19. 3.  If WINDOWS 3.0 is already installed on your system -> skip to step 7
  20.  
  21. 4.  Make sure there is at least 6.5MB available on your hard drive.
  22.  
  23. 5.  Insert the "Windows 3.0 Setup Diskette #1" in drive A, type A:
  24.     press ENTER, type SETUP, press ENTER.
  25.  
  26. 6.  Proceed with normal instalation of Windows until you reach the 
  27.     selection for "Display".   -> skip to step 10.
  28.    
  29. 7.  WARNING: Do not attempt to install this driver from within Windows
  30.     by clicking on the "Windows Setup" icon.  You must exit Windows 
  31.     and run Setup from the DOS command line.
  32.  
  33. 8.  Change Directory ("cd\" command) to the Windows system subdirectory.
  34.  
  35. 9.  Type SETUP and press ENTER.
  36.  
  37. 10. Select the "Display" option labeled "Other".
  38.  
  39. 11. Insert the WY-700 Driver diskette into drive A and hit ENTER. 
  40.  
  41. 12. After the Windows Setup Program copies the files from the Driver 
  42.     Diskette there will be an option on the display setup menu for the 
  43.     WY-700 listed as "1280 X 800".  Select this option.
  44.  
  45. 13. If you are  installing Windows for the First time ...
  46.     continue with the rest of the installation of Windows otherwise
  47.     the choice will be offered to alter the CONFIG.SYS file, select the
  48.     option "DO NOT to alter the CONFIG.SYS file".
  49.  
  50. 14. The installation of the WY-700 drivers is complete.
  51.  
  52.  
  53.     If you have problems with the installation call 408-435-2770 
  54.     and ask to talk to Technical Support.  We will take your phone number
  55.     and call you back so we pay for the call.
  56.  
  57.     *****************************************************
  58.     **  For Information about Wyse Service Contracts   **
  59.     **            Please call 1-800-626-3160           **
  60.     *****************************************************
  61.  
  62.